Job Responsibility工作职责
1.Provide technical knowledge to continuous improvement efforts aimed at increasing productivity.
2.Assist in the identification of new materials, methods, and tools in order to improve current processes and/or equipment.
3.Develop understanding of production processes to identify the key process parameters related to product performance.
4.Support the execution of studies to stabilize, characterize, and optimize key process parameters.
5.Support Manufacturing in efforts to troubleshoot the manufacturing processes on a daily basis.
6.Develop, maintain, and update manufacturing documentation with input from appropriate functions.
7.Assist production in the training of operators, technicians as needed.
8.Work with Environmental, Health, and Safety (EH&S) as needed to ensure that equipment and processes comply with applicable codes and regulations.
9.Provide technical support during the commissioning and debugging of new equipment.
10.Work with maintenance and production to define appropriate spare parts inventories and PM schedules.
11.Work with R&D to ensure process specifications, procedures, and controls related to new products are well documented and communicated before launch.
12.Provide input to R&D regarding processing options during the development of new products.
13.To set up develop and update process documentation (work instruction, pfmea, production diagrams).
14.To improve the safety, occupational health and environment protection related with work flow.

Position Qualification任职要求
1.Mechanical, Engineering and related major, with bachelor degree or above;
2.5 years or more welding fixture and site working experience , be familiar with caron dioxide, mig welding, and mag welding (Welding robot is preferred);
3.High skills of operation by hand and site issue solving;
4.Know the mechanical machining knowledge;
5.Good communication skills and team-working spirit;
6.Fluent English skills; Ability to work with all levels of management.
7.This job may require travel for extended periods; Maybe required to work extended hours; Stress-balance

Gestamp海斯坦普是一家致力于设计、开发和生产车用金属部件和总成的国际集团。专业开发具有使车辆更轻、更安全的创新设计的产品，从而令车辆获得更优秀的能耗环保比。我们为OEM整车厂客户提供汽车金属部件，主要是车身底盘部件及机构件。。在研发方面上，我们也不断地致力于减轻车身重量和增加安全性能，使产品在开发和应用上不断地提高市场竞争力。

我们的业务遍及全世界19个国家，有将近100家工厂，12个研发中心和30,000多名员工。凭借多年的生产经验和对核心技术的掌握，我们已经成为热成型技术的领导者之一。过去几年我们更是加大了对该技术研发的投入，并且在世界范围内进行推广，以满足来自汽车整车制造商对产品日益增长的需求。

我们在中国的首家工厂成立于2008年，位于江苏省昆山市，自此开始正式进入中国市场。海斯坦普的上海办公室于2007年7月成立，于2009年升级为海斯坦普亚太区管理总部。集团自2010年收购了爱德夏后，开启了迅猛发展的模式，于2011年收购了蒂森克虏伯金属成型武汉工厂，在短短的3年内新建了5个工厂（2012年的重庆工厂、2013年的沈阳工厂、2013年的昆山爱德夏工厂、2014年的东莞工厂和2014年的昆山工厂2期）。目前，在中国制造的关键汽车零部件主要有：A柱总成、B柱总成、地板加固件、牵引力操纵杆、发动机悬挂机架、门槛板、车门铰链，车门限位器，自动开闭系统和驾驶控制系统等。截止至2016年，我们主要的客户有大众、福特、标致、通用、宝马、吉利沃尔沃、捷豹路虎、戴姆勒、广汽、现代、本田和雷诺-尼桑。

随着海斯坦普集团在中国地区业务的不断发展， 我们即将在中国天津武清开发区建立一家全新的工厂，计划于2017年建成投产，办公地址位于天津市 武清开发区 泉汇路开源道附近。海斯坦普天津工厂将主要为京津地区的客户提供卓越的产品解决方案，如北京奔驰、北汽福田、一汽大众、一汽丰田等。